|
 |
||
 |
Often missing or cracked is the cover on the bottom of the gauge bracket, holding the gauge wiring loom snug to the bracket. Replace it with this new and pliable replacement cover, produced to original specs. Mounts with three 3mm screw which are NOT included.
Code: CBC725 Price: $ 14.95 View Item Top 
|
|
 |
 Front and rear side reflectors as used on the forks (yellow) and rear shocks (red) of the 900 Z1. Sold in pairs. Available on a chrome or black base.
Code: REF777 Price Chrome: $ 14.95 pair Price Black: $ 12.95 pair View Item Top
|
|
 |
Reproduction chain guard manufactured to original mounting specs suitable for the Z1, KZ900 and KZ1000 models from 1972 to 1980. Made from pliable and impact resistant ABS plastic it won't easily crack like the originals.
Code: CG780 Price: $ 59.50 View Item Top
|
|
 |
Stock Airfilter Lid screen, the part that is usually missing completely or left in fragments. Here is your chance to complete your bike with another, much sought after item.
Code: AFL725 Price: $ 31.95 View Item Top
|
|
 |
Finally an additional part became available to complete your 1976 KZ900A4 with the proper toolbox. Also essential to mount the sidecover properly as it contains one of three mounting points for the sidecover pin.
Code: TBZA4 Price: $ 44.95 View Item Top
|
|
 |
Exact reproduction of the LH and RH 1978-81 Z1R seat rails located underneath the seat on the side of the Z1R models. More pliable ABS plastic molds are reinforced and won't easily crack like originals. Sold individually, left or right.
Code: Z1RS Price: $ 42.50 View Item Top
|
|
 |
Often asked for, but for the most part to no avail, neither used or NOS. Finally available as an exact reproduction, - the trademark tailpiece of the 900 Z1. Made from sturdy ABS plastic this cover is ready for paint. (Actual base color of plastic may vary).
Code: TPZ1 Price: $ 62.50 View Item Top
|
|
 |
900 Z1 tailsection storage tray. Comes complete as shown with rubber pull handle and the sticker that shows the wiring diagram. WIll fit all Z1 tailsections from 1973 to 1975.
Code: Z1T725 Price: $ 79.50 View Item Top
|
|
 |
Don't put your rare sidecovers in danger to get lost, only because the rubber grommets are dried out, fallen apart or completely missing. Essential for snug fit of your sidecovers are pliable rubber grommets, replace them in time with a set of fresh grommets.
Code: SCG720 Price: Set of 3 (mounts one sidecover) $ 12.00 View Item Top
|
|
 |
Finally available as an excellent full steel reproduction is the left hand side cover for all H2 models from 1972 to 1975. Black primered, ready for paint, with correct cut-outs and attachments as pictured.
Code: H2SCL Price: $ 159.50 View Item Top
|
|
 |
Frequently missing and much sought after is the RH sidecover for the KZ650. Look no further, as we are finally able to offer an improved, reinforced pin design reproduction cover, that won't crack like the originals do. This cover features the recessed mount for the KZ650 emblems of the early series.
Code: SCR650R Price: $ 89.95 View Item Top
|
|
 |
Frequently missing and much sought after is the LH sidecover for the KZ650. Look no further, as we are finally able to offer an improved, reinforced pin design reproduction cover, that won't crack like the originals do. This cover features the recessed mount for the KZ650 emblems of the early series.
Code: SCL650R Price: $ 89.95 View Item Top
|
|
 |
Frequently missing and much sought after is the RH sidecover for the KZ650. Look no further, as we are finally able to offer an improved, reinforced pin design reproduction cover, that won't crack like the originals do. This cover has the flat emblem mounting surface.
Code: SCR650 Price: $ 89.95 View Item Top
|
|
 |
Frequently missing and much sought after is the LH sidecover for the KZ650. Look no further, as we are finally able to offer an improved, reinforced pin design reproduction cover, that won't crack like the originals do. This cover has the flat emblem mounting surface.
Code: SCL650 Price: $ 89.95 View Item Top
|
|
 |
Exact reproduction of the RH sidecover for the KZ650 D + E modles (SR + LTD) built from 1978 to 1980. Improved, reinforced pin design won't easily crack like originals.
Code: SCR-650D Price: $ 89.95 View Item Top
|
|
 |
Exact reproduction of the LH sidecover for the KZ650 D + E modles (SR + LTD) built from 1978 to 1980. Improved, reinforced pin design won't easily crack like originals.
Code: SCL-650D Price: $ 89.95 View Item Top
|
|
  |
Exact reproduction of the LH 1973-75 900Z1. Made from sturdy ABS plastic this cover is ready for paint. (Actual base color of plastic may vary).
Code: SCL725 Price: $ 29.95 View Item Top
|
|
  |
Exact reproduction of the RH 1973-75 900Z1. Made from sturdy ABS plastic this cover is ready for paint. (Actual base color of plastic may vary).
Code: SCR725 Price: $ 29.95 View Item Top
|
|
  |
Exact reproduction of the LH 1976 KZ 900. Improved, reinforced pin design won't easily crack like originals.
Code: SCL768 Price: $ 89.95 View Item Top
|
|
  |
Exact reproduction of the RH 1976 KZ 900. Improved, reinforced pin design won't easily crack like originals.
Code: SCR076 Price: $ 89.95 View Item Top
|
|
 |
Exact reproduction of the RH sidecover for the KZ1000ST (E1/E2) models built from 1979 to 1980. Improved, reinforced pin design won't easily crack like originals.
Code: SCR10ST Price: $ 89.95 View Item Top
|
|
 |
Exact reproduction of the LH sidecover for the KZ1000ST (E1/E2) models built from 1979 to 1980. Improved, reinforced pin design won't easily crack like originals, even features built-in removable lock cover.
Code: SCL10ST Price: $ 89.95 View Item Top
|
|
 |
Exact reproduction of the RH sidecover for the 1978 to 1981 KZ1000D, a.k.a. the legendary Z1R. Improved, reinforced pin design won't easily crack like the originals.
Code: SCRZ1R Price: $ 89.95 View Item Top
|
|
 |
Exact reproduction of the LH sidecover for the 1978 to 1981 KZ1000D, a.k.a. the legendary Z1R. Improved, reinforced pin design won't easily crack like the originals.
Code: SCLZ1R Price: $ 89.95 View Item Top
|
|
 |
Exact reproduction of the LH sidecover for the 1981 to 1983 KZ1000J, the 1981 + 1982 KZ1100B1+B2 (GPZ) as well as the Eddie Lawson Replica Bikes KZ1000 and KZ1100R from 1982 to 1985. Improved, reinforced pin design won't easily crack like the originals.
Code: SCL1JB Price: $ 89.95 View Item Top
|
|
 |
Exact reproduction of the R sidecover for the 1981 to 1983 KZ1000J, the 1981 + 1982 KZ1100B1+B2 (GPZ) as well as the Eddie Lawson Replica Bikes KZ1000 and KZ1100R from 1982 to 1985. Improved, reinforced pin design won't easily crack like the originals.
Code: SCR1JB Price: $ 89.95 View Item Top
|
|
 |
Another hard to get item is this exact reproduction of the LH sidecover for the 1981+82 KZ1000K (LTD) KZ1000M (CSR) models. Also correct for the KZ1000P (Police) models from 1982 on up. Improved, reinforced pin design won't easily crack like the originals.
Code: SCL81K Price: $ 89.95 View Item Top
|
|
 |
Another hard to get item is this exact reproduction of the RH sidecover for the 1981+82 KZ1000K (LTD) KZ1000M (CSR) models. Also correct for the KZ1000P (Police) models from 1982 on up. Improved, reinforced pin design won't easily crack like the originals.
Code: SCR81K Price: $ 89.95 View Item Top
|
|
  |
Exact reproduction of the LH sidecover, fits all 1977 + 1978 KZ 1000 A as well as the LTD models (including The Z1 Classic G model) up to 1980. Improved, reinforced pin design won't easily crack like originals.
Code: SCL778 Price: $ 89.95 View Item Top
|
|
  |
Exact reproduction of the RH sidecover, fits all 1977 + 1978 KZ 1000 A as well as the LTD models (including The Z1 Classic G model) up to 1980. Improved, reinforced pin design won't easily crack like originals.
Code: SCR778 Price: $ 89.95 View Item Top
|
|
 |
